국제 진동 규격 정리

 

안녕하세요!!!

계측 솔류션 전문 씨앤디테크입니다.

진동 측정과 관련된 국제 표준에 대해 소개해 드립니다.

 

Number / Source	Title
ANSI S2.1	Vibration and Shock – Vocabulary
ANSI S2.2	Methods for the Calibration of Shock and Vibration Pickups
ANSI S2.4	Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements
ANSI S2.7	Balancing Terminology
ANSI S2.13	Mechanical Vibration of Non-Reciprocating Machines – Measurements on Rotating Shafts and Evaluation Part 1: General Guidelines
ANSI S2.16	Vibration Noise Measurements and Acceptance Criteria of Shipboard Equipment
ANSI S2.17	Machinery Vibration Measurement
ANSI S2.19	Mechanical Vibration – Balance Quality Requirements of Rigid Rotors Part 1: Determination of Permissible Residual Unbalance
ANSI S2.25	Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships
ANSI S2.26	Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment
ANSI S2.28	Guide for the Measurement and Evaluation of Vibration of Shipboard Machinery
ANSI S2.29	Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery
ANSI S2.40	Mechanical Vibration of Rotating and Reciprocating Machinery – Requirements for Instruments for Measuring Vibration Severity
ANSI S2.41	Mechanical Vibration of Large Rotating Machines with Speed Range from 10 to 200 rev/s – Measurement and Evaluation of Mechanical Vibration Severity in situ
ANSI S2.42	Procedures for Balancing of Flexible Rotors
ANSI S2.43	Criteria for Evaluating Flexible Rotor Balance
ANSI S2.45	Electrodynamic Test Equipment for Generating Vibration – Method of Describing Equipment Characteristics
ANSI S2.46	Characteristics to be Specified for Seismic Transducers
ANSI S2.47	Vibration of Buildings – Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings
ANSI S2.48	Servo-Hydraulic Test Equipment for Generating Vibration – Methods of Describing Characteristics
ANSI S2.58	Auxiliary Tables for Vibration Generators – Methods of Describing Equipment Characteristics
ANSI S2.61	Guide to the Mechanical Mounting of Accelerometers
ANSI S2.70	Guide for the Measurement and Evaluation of Human Exposure to Vibration Transmitted to the Hand
ANSI S2.73	Mechanical Vibration and Shock–Hand-arm Vibration–Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand
ANSI S3.18	Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration (ISO 2631)
ANSI S3.29	Guide to the Evaluation of Human Exposure to Vibration in Buildings
ANSI S3.32	Mechanical Vibration and Shock Affecting Man – Vocabulary
ANSI S3.34	Human Exposure to Vibration Transmitted to the Hand, Guide for Measurement and Evaluation of
ANSI S3.40	Mechanical Vibration and Shock – Hand-Arm Vibration – Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand (ISO 10819)
ANSI S12.11	Acoustics – Measurement of noise and vibration of small air-moving devices – Part 2: Structure-borne vibration
ANSI/AGMA 6000-B96	Specification for Measurement of Linear Vibration on Gear Units
ANSI/ASHRAE 87.1	Method of Testing Fan Vibration–Blade Vibrations and Critical Speeds
ANSI/ASHRAE 87.3	Methods of Testing Propeller Fan Vibration—-Diagnostic Test Methods
ARI 530-95	Method of Rating Sound and Vibration of Refrigerant Compressors
AS 1359.114	Rotating electrical machines – General requirements – Vibration measurements and limits (IEC 34-14)
AS 1807.17 AS 1807.18	Cleanrooms, workstations, safety cabinets and pharmaceutical isolators – Methods of test Part 17: Determination of vibration in cleanrooms Part 18: Determination of vibration in workstations, safety cabinets and pharmaceutical isolators
AS 2362.15	Fire detection, warning, control and intercom systems – Methods of test – Vibration test
AS 2400.10	Packaging – Protection against shock and vibration (cushioning)
AS 2582.6 AS 2582.11	Complete, filled transport packages – Methods of test Part 6: Vibration test at fixed low frequency Part 11: Sinusoidal vibration tests using a variable frequency
AS 2606	Vibration and shock – Vocabulary (ISO 2041)
AS 2625.1 AS 2625.4	Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts (ISO 10816) Part 1: General guidelines Part 4: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
AS 2641	Vibration and shock – Balancing – Vocabulary (ISO 1925)
AS 2670.1 AS 2670.2 AS 2670.4	Evaluation of human exposure to whole-body vibration (ISO 2631) Part 1: General requirements Part 2: Continuous and shock-induced vibration in buildings (1 to 80Hz) Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
AS 2763	Vibration and shock – Hand-transmitted vibration – Guidelines for measurement and assessment of human exposure
AS 2775	Mechanical vibration and shock – Mechanical mounting of accelerometers (ISO 5348)
AS 2955	Earth-moving machinery – Tests and measurements – Operator seat – Transmitted vibration
AS 2973	Vibration and shock – Human response vibration-measuring instrumentation
AS 2993	Vibration and shock – Dynamic characteristics of the human body – Driving point impedance of the human body
AS 3658	Vibration and shock – Mechanical vibration and shock affecting humans – Vocabulary (ISO 5805)
AS 3709	Vibration and shock – Balance quality of rotating rigid bodies (ISO 1940-1)
AS 3721	Vibration and shock – Balancing machines – Description and evaluation (ISO 2953)
AS 3728	Vibration and shock – Resilient shaft couplings – Information to be supplied by users and manufacturers
AS 3762	Measurement and reporting of local vibration data of ship structures and equipment (ISO 4868)
AS 3763	Mechanical vibration and shock – Guidelines for the overall evaluation of vibration in merchant ships (ISO 20283-5)
AS 3764	The measurement and reporting of shipboard vibration data (ISO 4867)
AS 4594.5	Internal combustion engines – Performance – Engines for land, rail-traction and marine use – Torsional vibrations (ISO 3046)
ASTM D999-01	Standard Methods for Vibration Testing of Shipping Containers
ASTM D3580-95	Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
ASTM D4728-01	Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D5112-98	Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D6874-03	Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
BS 5228-1 BS 5228-2	Code of practice for noise and vibration control on construction and open sites Part 1: Noise Part 2: Vibration
BS 6472-1 BS 6472-2	Guide to evaluation of human exposure to vibration in buildings
BS 6611	Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)
BS 6841	Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
BS 7085	Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock
BS 7385-2	Evaluation and measurement for vibration in buildings
CR 1030-1 CR 1030-2	Hand-arm vibration – Guidelines for vibration hazards reduction Part 1: Engineering methods by design of machinery , Part 2: Management measures at the workplace
CR 12349	Mechanical vibration – Guide to the health effects of vibration on the human body
D5112-98	Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
D3580-95	Standard Test Methods for vibration (Vertical Linear Motion) Test of Products
DIN 1311-1 DIN 1311-2 DIN 1311-3 DIN 1311-4	(Mechanical) vibrations, oscillation and vibration systems Part 1: Basic concepts, survey Part 2: Linear vibration systems with single degree of freedom Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom Part 4: Vibration; vibrating continua, waves
DIN 3979	Tooth Damage on Gear Trains; Designation, Characteristics, Causes
DIN 4150-1 DIN 4150-2 DIN 4150-3	Vibrations in buildings Part 1: Predictions of vibration parameters Part 2: Human exposure to vibration in buildings Part 3: Effects on structures
DIN 4178	Belltowers
DIN 5426-1	Rolling bearings – Rolling bearing vibration and noise – Part 1: Methods for measurement of structure-borne noise
DIN 25475-2	Nuclear facilities – Operational monitoring Part 2: Vibration monitoring for early detection of changes in the vibrational behavior of the primary coolant circuit in pressurized water reactors
DIN 30787-6	Transportation loads – Measurement and evaluation of dynamic mechanical loads Part 6: Automatic recording systems for measuring random shock while monitoring transports
DIN 31692-3	DIN 31692-3 Vibration monitoring of plain bearings
DIN 45635-8	Determination of airborne noise emitted by machines by, measurement of structure borne noise; basic requirements
DIN 45661	Vibration measuring instrumentation – Vocabulary
DIN 45662	Vibration measuring instrumentation – Fundamental requirements and verification
DIN 45667	Classification methods for evaluation of random vibrations
DIN 45669-1 DIN 45669-2	Measurement of vibration immissions Part 1: Vibration meters – Requirements and tests Part 2: Measuring method
DIN 45672-1 DIN 45672-2	Vibration measurement associated with railway traffic systems Part 1: Measuring method for vibration Part 2: Evaluation method
DIN 45673-1 DIN 45673-2	Resilient elements used in railway tracks Part 1: Terms and definitions, classification, test procedures Part 2: Determination of static and dynamic characteristics in the track under operation
DIN 45678	Mechanical vibration – Articulated trucks – Laboratory method for evaluating vehicle seat vibration
DIN 45679	Mechanical vibration – Measurement and evaluation of coupling forces for assessment of vibration exposure of the hand-arm system
DIN 45694	Mechanical vibration – Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery
DIN 45695	Hand-arm vibration – Guidelines for vibration hazards reduction – Engineering and management measures (CR 1030-1 + CR 1030-2)
DIN 50100	Load controlled fatigue testing – Execution and evaluation of cyclic tests at constant load amplitudes on metallic specimens and components
DIN 52210	Testing of acoustics in buildings – Airborne and impact sound insulation – Determination of the level difference by shafts
DIN 70003	Vibrational stress; measurement of parameters on vehicle parts
EN 1032	Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value
EN 1177	Impact attenuating playground surfacing – Methods of test for determination of impact attenuation
EN 1299	Mechanical vibration and shock – Vibration isolation of machines – Information for the application of source isolation
EN 12096	Mechanical vibration – Declaration and verification of vibration emission values
EN 12503-4	Gymnastic mats – Part 4: Determination of shock absorption
EN 12786	Safety of machinery – Requirements for the drafting of the vibration clauses of safety standards
EN 13059	Safety of industrial trucks – Test methods for measuring vibration
EN 13490	Mechanical vibration – Industrial trucks – Laboratory evaluation and specification of operator seat vibration
EN 14253	Mechanical vibration – Measurement and calculation of occupational exposure to whole-body vibration with reference to health – Practical guidance
EN 30326	Mechanical vibration – Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements (ISO 10326-1)
EN 60068-2-64	Environmental testing – Part 2-64: Tests – Test Fh: Vibration, broadband random and guidance
EN 60255-21-3	Electrical relays (IEC 60255) Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 3: Seismic tests
EN 60512-6-4 EN 60512-6-5	EN 60512-6-4▹ Connectors for electronic equipment – Tests and measurements (IEC 60512) Part 6-4: Dynamic stress tests; Test 6d: Vibration (sinusoidal) Part5: Test 6e: Vibration, noise (DIN EN 60512)
EN 60745	Hand-held motor-operated electric tools – Safety Part 1: General requirements (IEC 60745-1:2006, modified) Part 2-1: Particular requirements for drills and impact drills Part 2-2: Particular requirements for screwdrivers and impact wrenches Part 2-3: Particular requirements for grinders, polishers and disk-type sanders Part 2-4: Particular requirements for sanders and polishers other than disk type Part 2-5: Particular requirements for circular saws Part 2-6: Particular requirements for hammers Part 2-8: Particular requirements for shears and nibblers Part 2-9: Particular requirements for tappers Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) Particular requirements for concrete vibrators Part 2-13: Particular requirements for chain saws Part 2-14: Particular requirements for planers Part 2-15: Particular requirements for hedge trimmers Part 2-17: Particular requirements for routers and trimmers Part 2-18: Particular requirements for strapping tools Part 2-19: Particular requirements for jointers Part 2-20: Particular requirements for band saws Part 2-21: Particular requirements for hand-held drain cleaners
EN 60994	Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) (IEC 60994)
EN 61373	Railway applications – Rolling stock equipment – Shock and vibration tests (IEC 61373:2010)
ENV 25349	Mechanical vibration – Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration (ISO 5349)
DIN ENV 28041	Human response to vibration – Measuring instrumentation (DIN EN ISO 8041)
GB 10068-2000	Mechanical vibration of certain machines with shaft heights 56 mm and higher–Measurement,evaluation and limits of vibration
GB 10070	Standard of environmental vibration in urban area
GB 10434	Hygienic standard for hand-transmitted vibration in the work environment
GB 4869	Diagnostic criteria and principles of management of occupational vibration disease
GB/T 10071	Measurement method of environmental vibration of urban area
GB/T 10084	Vibration and shock–methods for analysis and presentation of data
GB/T 10283	Portable pneumatic extinguishers–Measurement of hand-transmitted vibration
GB/T 10397	Small and medium power engines-Evaluation of vibration
GB/T 10593.3	Methods of measuring environmental parameters for electric and electronic products–Treatment and induction for the vibration data
GB/T 10895	Centrifuge and separator-Measurement method of mechanical vibration
GB/T 10910	Agricultural wheeled tractors and fieled machinery-Measurement of whole-body vibration of the operator
GB/T 11287	Electrical relays–Part 21: Vibration,shock,bump and seismic tests on measuring relays and protection equipment
GB/T 11348.1 GB/T 11348.2 GB/T 11348.3 GB/T 11348.4 GB/T 11348.5	Mechanical vibration of non-reciprocating machines–Measurements on rotating shafts and evaluation criteria Part 1: General guidelines Part 2: Large land-based steam turbine generator sets Part 3: Coupled industrial machines Part 4: Gas turbine sets Part 5: Machine sets in hydraulic power generating and pumping plants
GB/T 11706	Measurement method of vibration for marine engine room auxiliaries
GB/T 13364	Measurement of mechanical vibration for reciprocating pump
GB/T 13436	Technical requirements for torsional vibration measuring instruments
GB/T 13441	Specification for measurement of human exposure to whole-body vibration environment
GB/T 13442	Reduced comfort boundary and evaluation criteria for human exposure to whole-body vibration
GB/T 13670	Mechanical vibration–Measurement and analysis of vibration to which passengers and crew are exposed in railway vehicles
GB/T 13823.1 GB/T 13823.2 GB/T 13823.3 GB/T 13823.4 GB/T 13823.5 GB/T 13823.6 GB/T 13823.7 GB/T 13823.8 GB/T 13823.9 GB/T 13823.10 GB/T 13823.11 GB/T 13823.12 GB/T 13823.13 GB/T 13823.14 GB/T 13823.15 GB/T 13823.16 GB/T 13823.17 GB/T 13823.18	Methods for the calibration of vibration and shock pick-ups Part 1: Basic concepts Part 2: Primary vibration calibration by laser interferometry Part 3: Comparison(secondary vibration)calibration by sinusoidal excitation Part 4: Testing of magnetic field sensitivity Part 5: Testing of mounting torque sensitivity Part 6: Testing of base strain sensitivity Part 7: Primary vibration calibration by comparison of phase angles Part 8: Testing of transverse vibration sensitivity Part 9: Testing of transverse shock sensitivity Part 10: Methods for the calibration of vibration and shock pick-ups–Secondary shock calibration Part 11: Primary vibration calibration by laser interferometry at low frequencies Part 12: Resonance frequency testing of undamped accelerometers on a steel block Part 13: Primary shock calibration by light cutting Part 14: Primary calibration by centrifuge Part 15: Testing of transient temperature sensitivity Part 16: Testing of temperature response by comparison Part 17: Testing of acoustic sensitivity Part 18: Primary vibration calibration by reciprocity method
GB/T 13824	Requirements for instruments for measuring vibration severity
GB/T 13860	Mechanical vibrations–Land vehicles-Method for reporting measured data
GB/T 13866	Shock and vibration measurements–Characteristics to be specified for seismic pick-ups
GB/T 13876	Evaluation criteria of whole body vibration of the operator
GB/T 14124	Mechanical vibration and shock–Measurement and evaluation of vibration effects on buildings–Guidelines for the use of basic standard methods
GB/T 14125	Vibration and shock sensitive equipment–Methods of measurement and reporting data of vibration and shock effects in buildings
GB/T 14179	Brush saws–Measurements of hand-transmitted vibration
GB/T 14412	Mechanical vibration and shock–Mechanical mounting of accelerometers
GB/T 14696	Code for the measurement of ship vibration
GB/T 14697	Code for the measurement of local vibration of ship
GB/T 14790	Methods for the measurement and the assessment of human exposure to hand-transmitted vibration
GB/T 15619	Terminology for human exposure to mechanical vibration and shock
GB/T 16301	Evaluation of vibration severity for marine engine-room auxiliaries
GB/T 16440	Vibration and shock–Mechanical driving point impedance of the human body
GB/T 16441	Vibration and shock–Mechanical transmissibility of the human body in the z direction
GB/T 16539	Determination of sound power levels of noise sources using vibration velocity–Measurement for seal machinery
GB/T 16768	Metal-cutting machine tools–Measurement method for vibration
GB/T 16908	Mechanical vibration–Balancing–Shaft and fitment key convention
GB/T 17046	Vibratory rollers Parts The evaluation to exposure mechanical vibration
GB/T 17189	Code for field measurement of vibrations and pulsations in hydraulic machines
GB/T 17958	Requirements for vibration hazards reduction of hand-held machines at the workplace
GB/T 18051	Tests of electric submersible pump system vibration
GB/T 18368	Comfort evaluation of human exposure to whole-body vibration in recumbent position
GB/T 18703	Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
GB/T 18707.1	Mechanical vibration–Laboratory method for evaluating vehicle seat vibration–Part 1: Basic requirements
GB/T 2298	Mechanical vibration and shock-Terminology
GB/T 2414.1 GB/T 2414.2	Test methods for the properties of piezoelectric ceramics Part 1: Radial extension vibration mode for disk Part 2: Transverse length extension vibration mode for bar
GB/T 2423.10 GB/T 2423.11 GB/T 2423.12 GB/T 2423.14 GB/T 2423.42 GB/T 2423.43 GB/T 2423.47 GB/T 2423.48 GB/T 2423.49	Environmental testing for electric and electronic products–Part 2: Test methods Part 10: Test Fc and guidance: Vibration (Sinusoidal) Part 11: Test Fd: Random vibration wide band Part 12: Test Fda: Random vibration wide band–Reproducibility high Part 14: Test Fdc: Random vibration wide band–Reproducibility low Part 42: Combined low temperature/low air pressure / vibration (sinusoidal) test Part 43: Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ca) Part 47: Test Fg: Vibration, acoustically induced Part 48: Test Ff:Vibration–Time-history method Part 49: Test Fe: Vibration–sine-beat method
GB/T 3389.4 GB/T 3389.5 GB/T 3389.6	Test methods for the properties of piezoelectric ceramics Part 4: Longitudinal length extension vibration mode for rod Part 5: Thickness extension vibration mode for disk Part 6 Thickness-shear vibration mode for rectangular plate:
GB/T 4451	Methods of vibration (sinusoidal) test for use in industrial process measurement and control instrument
GB/T 4857.10	Packaging–Transport packages–Sinusoidal vibration test method using a variable vibration frequency
GB/T 4857.7	Packaging–Transport packages–Sinusoidal vibration test method at constant frequency
GB/T 5170.13	Inspection methods for basic parameters of environmental testing equipments for electric and electronic products–Mechanical vibrating type machines for vibration (sinusoidal ) test
GB/T 5170.15	Inspection methods for basic parameters of environmental testing equipments for electric and electronic products–Hydraulic vibrating type machines for vibration
GB/T 5395	Portable chain saws-Measurement of hand-transmitted vibration
GB/T 5913	Mechanical vibration of machines and equipments in diesel locomotive Evaluation of vibration severity in site
GB/T 6444	Mechanical vibration–Balancing vocabulary
GB/T 6587.4	Vibration tests for electronic measuring instruments
GB/T 7031	Vehicle vibration–Describing method for road surface irregularity
GB/T 7183	Evaluation of mechanical vibration severity of machines and equipments in electric locomotives
GB/T 7184	Measurement method of vibration for small and medium power diesel engines
GB/T 7452.1	Guidelines for the overall evaluation of vibration in merchant ships
GB/T 7452.2	Guidelines for the overall evaluation of vibration in merchant ships under 100m
GB/T 7453	Measurement of ship vibration
GB/T 8543	Determination of mechanical vibrations of gear units during acceptance testing
IBM	IBM® Standards Authority for Vibration and Shock, classes of vibration environments
IEC 60034-14	Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration severity
IEC 60255-21	Electrical relays Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 3: Seismic tests
IEC 60512-6-4 IEC 60512-6-5	Connectors for electronic equipment – Tests and measurement (DIN EN 60255-21-3) Part 6-4: Dynamic stress tests; Test 6d: Vibration (sinusoidal) Part5: Test 6e: Vibration, noise (DIN EN 60512)
IEC 60721-2-6	Classification of environmental conditions Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock
IEC 60745	Hand-held motor-operated electric tools – Safety
IEC 60749-12	Semiconductor devices – Mechanical and climatic test methods Part 12: Vibration, variable frequency
IEC 60994	Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
IEC 61300-2-1	Fibre optic interconnecting devices and passive components – Basic test and measurement procedures Part 2-1: Tests – Vibration (sinusoidal) (DIN IEC 61300-2-1)
IEC 61373	Railway applications – Rolling stock equipment – Shock and vibration tests (DIN EN 61373)
IEC 61502	Nuclear power plants – Pressurized water reactors – Vibration monitoring of internal structures
IEEE 344	IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
IEEE 1451.4	IEEE Standard for A Smart Transducer Interface for Sensors and Actuators–Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
ISA-RP37.2	Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing
ISO 140	Acoustics — Measurement of sound insulation in buildings and of building elements
ISO 1925	Mechanical vibration — Balancing — Vocabulary
ISO 1940-1 ISO 1940-2	Mechanical vibration – Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances Part 2: Balance errors
ISO 2017	Mechanical vibration and shock – Resilient mounting systems
ISO 2041	Mechanical vibration, shock and condition monitoring – Vocabulary
ISO 2247	Packaging – Complete, filled transport packages and unit loads – Vibration tests at fixed low frequenc
ISO 2371	withdrawn
ISO 2372	withdrawn, replaced by ISO 20816-1
ISO 2373	withdrawn
ISO 2631-1 ISO 2631-2 ISO 2631-4 ISO 2631-5	Mechanical vibration and shock – Evaluation of human exposure to whole-body vibration Part 1: General requirements Part 2: Vibration in buildings (1 Hz to 80 Hz) Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems Part 5: Method for evaluation of vibration containing multiple shocks
ISO 2671	Environmental tests for aircraft equipment Part 3.4 : Acoustic vibration
ISO 2953	Mechanical vibration – Rotor balancing – Part 21: Description and evaluation of balancing machines
ISO 2954	Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
ISO 4866	Mechanical vibration and shock – Vibration of fixed structures – Guidelines for the measurement of vibrations and evaluation of their effects on structures
ISO 4867	Code for the measurement and reporting of shipboard vibration data
ISO 4868	Code for the measurement and reporting of local vibration data of ship structures and equipment
ISO 5007	Agricultural wheeled tractors – Operators seat – Laboratory measurement of transmitted vibration
ISO 5008	Agricultural wheeled tractors and field machinery – Measurement of whole-body vibration of the operator
ISO 5344	Electrodynamic vibration generating systems – Performance characteristics
ISO 5347-8 ISO 5347-12 ISO 5347-13 ISO 5347-15 ISO 5347-16 ISO 5347-18 ISO 5347-22	Methods for the calibration of vibration and shock pick-ups Part 8: Primary calibration by dual centrifuge Part 12: Testing of transverse shock sensitivity Part 13: Testing of base strain sensitivity Part 15: Testing of acoustic sensitivity Part 16: Testing of mounting torque sensitivity Part 18: Testing of transient temperature sensitivity Part 22: Accelerometer resonance testing – General methods
ISO 5348	Mechanical vibration and shock – Mechanical mounting of accelerometers
ISO 5349-1 ISO 5349-2	Mechanical vibration – Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements Part 2: Practical guidance for measurement at the workplace
ISO 5805	Mechanical vibration and shock – Human exposure – Vocabulary
ISO 5982	Mechanical vibration and shock – Range of idealized values to characterize human biodynamic response under whole-body vibration
ISO 6070	Auxiliary tables for vibration generators – Methods of describing equipment characteristics
ISO 6721	Plastics – Determination of dynamic mechanical properties
ISO 6897	Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off-shore structures, to low-frequency horizontal motion (0,063 to 1 Hz)
ISO 6954	Mechanical vibration — Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships (withdrawn, replaced by ISO 20283-5)
ISO 7096	Earth-moving machinery – Laboratory evaluation of operator seat vibration
ISO 7626-1 ISO 7626-2 ISO 7626-5	Mechanical vibration and shock – Experimental determination of mechanical mobility Part 1: Basic terms and definitions, and transducer specifications Part 2: Measurements using single-point translation excitation with an attached vibration exciter Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
ISO/TR 7849	Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement
ISO 7919-2	Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
ISO 8002	Mechanical vibrations — Land vehicles — Method for reporting measured data
ISO 8041-1 ISO 8041-2	Human response to vibration — Measuring instrumentation Part 1: General purpose vibration meters Part 2: Personal vibration exposure meters
ISO 8042	Characteristics to be specified for seismic pick-ups
ISO 8568	Mechanical shock – Testing machines – Characteristics and performance
ISO 8528-9	Reciprocating internal combustion engine driven alternating current generating sets – Part 9: Measurement and evaluation of mechanical vibrations
ISO 8608	Mechanical vibration – Road surface profiles – Reporting of measured data
ISO 8626	Servo-hydraulic test equipment for generating vibration – Method of describing characteristics
ISO 8727	Mechanical vibration and shock – Human exposure – Biodynamic coordinate systems
ISO 9688	Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses
ISO 9996	Mechanical vibration and shock – Disturbance to human activity and performance – Classification
ISO 10055	Mechanical vibration – Vibration testing requirements for shipboard equipment and machinery components
ISO 10068	Mechanical vibration and shock – Mechanical impedance of the human hand-arm system at the driving point
ISO 10326-1 ISO 10326-2	Mechanical vibration – Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements Part 2: Application to railway vehicles
ISO/TS 10811-1 ISO/TS 10811-2	Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment Part 1: Measurement and evaluation Part 2: Classification
ISO 10813-1	Vibration generating machines — Guidance for selection Part 1: Equipment for environmental testing
ISO 10815	Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains
ISO 10816-6 ISO 10816-7 ISO 10816-21	Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts Part 6: Reciprocating machines with power ratings above 100 kW Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts Part 21: Horizontal axis wind turbines with gearbox
ISO 10817-1	Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial
ISO 10819	Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
ISO 10846-1 ISO 10846-2 ISO 10846-3 ISO 10846-4	Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 1: Principles and guidelines Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
ISO 13090-1	Mechanical vibration and shock — Guidance on safety aspects of tests and experiments with people Part 1: Exposure to whole-body mechanical vibration and repeated shock
ISO 13091-1 ISO 13091-2	Mechanical vibration – Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 1: Methods of measurement at the fingertips Part 2: Analysis and interpretation of measurements at the fingertips
ISO 13332	Reciprocating internal combustion engines – Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
ISO 13350	Fans — Performance testing of jet fans
ISO 13355	Packaging — Complete, filled transport packages and unit loads — Vertical random vibration test
ISO 13373-1 ISO 13373-2 ISO 13373-3 ISO 13373-4 ISO 13373-5 ISO 13373-7 ISO 13373-9	Condition monitoring and diagnostics of machines – Vibration condition monitoring Part 1: General guidelines Part 2: Processing, analysis and presentation of vibration data Part 3: Guidelines for vibration diagnosis Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings Part 5: Diagnostic techniques for fans and blowers Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants Part 9: Diagnostic techniques for electric motors
DIN EN ISO 13753	Mechanical vibration and shock – Hand-arm vibration – Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
ISO 14694	Industrial fans — Specifications for balance quality and vibration levels
ISO 14695	Industrial fans — Method of measurement of fan vibration
ISO 14839-1 ISO 14839-2 ISO 14839-3 ISO 14839-4 ISO 14839-5	Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings Part 1: Vocabulary Part 2: Evaluation of vibration Part 3: Evaluation of stability margin Part 4: Technical guidelines Part 5: Touch-down bearings
ISO 14963	Mechanical vibration and shock – Guidelines for dynamic tests and investigations on bridges and viaducts
ISO 15242-1 ISO 15242-2 ISO 15242-3 ISO15242-4	Rolling bearings – Measuring methods for vibration Part 1: Fundamentals Part 2: Radial ball bearings with cylindrical bore and outside surface Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
ISO 15243	Rolling bearings – Damage and failures – Terms, characteristics and causes
ISO/TS 15694	Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
ISO 16063-1 ISO 16063-11 ISO 16063-12 ISO 16063-13 ISO 16063-15 ISO 16063-16 ISO 16063-17 ISO 16063-21 ISO 16063-22 ISO 16063-31 ISO 16063-32 ISO 16063-33 ISO 16063-34 ISO 16063-41 ISO 16063-42 ISO 16063-43 ISO 16063-44 ISO 16063-45	Methods for the calibration of vibration and shock transducers Part 1: Basic concepts Part 11: Primary vibration calibration by laser interferometry Part 12: Primary vibration calibration by the reciprocity method Part 13: Primary shock calibration using laser interferometry Part 15: Primary angular vibration calibration by laser interferometry Part 16: Calibration by Earth’s gravitation Part 17: Primary calibration by centrifuge Part 21: Vibration calibration by comparison to a reference transducer Part 22: Shock calibration by comparison to a reference transducer Part 31: Testing of transverse vibration sensitivity Part 32: Resonance testing – Testing the frequency and the phase response of accelerometers by means of shock excitation Part 33: Testing of magnetic field sensitivity Part 34: Testing of sensitivity at fixed temperatures Part 41: Calibration of laser vibrometers Part 42: Calibration of seismometers with high accuracy using acceleration of gravity Part 43: Calibration of accelerometers by model-based parameter identification Part 44: Calibration of field vibration calibrators Part 45: In-situ calibration of transducers with built in calibration coil
ISO 18431-1 ISO 18431-2 ISO 18431-3 ISO 18431-4	Mechanical vibration and shock – Signal processing Part 1: General introduction Part 2: Time domain windows for Fourier Transform analysis Part 3: Methods of time-frequency analysis Part 4: Shock-response spectrum analysis
ISO 18436-1 ISO 18436-2	Condition monitoring and diagnostics of machine systems – Requirements for certification of personnel Part 1: Sector specific requirements for certification bodies and the certification process Part 2: Vibration condition monitoring and diagnostics
ISO 18649	Mechanical vibration – Evaluation of measurement results from dynamic tests and investigations on bridges
ISO/TR 19664	Human response to vibration – Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
ISO 20283-2 ISO 20283-3 ISO 20283-4 ISO 20283-5	Mechanical vibration – Measurement of vibration on ships Part 2: Measurement of structural vibration Part 3: Pre-installation vibration measurement of shipboard equipment Part 4: Measurement and evaluation of vibration of the ship propulsion machinery Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
ISO 20643	Mechanical vibration – Hand-held and hand-guided machinery – Principles for evaluation of vibration emission
ISO 20816-1 ISO 20816-2 ISO 20816-3 ISO 20816-4 ISO 20816-5 ISO 20816-8 ISO 20816-9	Mechanical vibration – Measurement and evaluation of machine vibration Part 1: General guidelines Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000 r/min Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings Part 5: Machine sets in hydraulic power generating and pump-storage plants Part 8: Reciprocating compressor systems Part 9: Gear units
ISO 22867	Forestry and gardening machinery – Vibration test code for portable hand-held machines with internal combustion engine – Vibration at the handles
JIS B 0906	Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – General guidelines
JIS B 0907	Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
JIS B 0910	Mechanical vibration of non-reciprocating machines – Measurements on rotating shafts and evaluation criteria
JIS B 0911	Mechanical vibration – Susceptibility and sensitivity of machines to unbalance
JIS B 1754	Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing
JIS C 1510	Vibration level meters
JIS C 1512	Level recorders for recording sound level and/or vibration level
JIS D 1601	Vibration testing methods for automobile parts
JIS E 3014	Parts for railway signal – Vibration test methods
JIS E 4023	Vibration characteristics of railway rolling stock – Measuring methods
JIS E 4031	Railway rolling stock parts – Test methods for vibration
JIS Z 0232	Packaged freights – Method of vibration test
JIS Z 8735	Methods of measurement for vibration level
MIL-A-8870C	Airplane Strength and Rigidity Vibration, Flutter, and Divergence
MIL-STD-167	Mechanical Vibrations On Ship Board Systems
MIL-STD-167/1	Mechanical Vibrations of Shipboard Equipment (Type I – Environmental and Type II – Internally Excited)
MIL-STD-167/2	MIL-STD-167/2 Mechanical Vibrations of Shipboard Equipment (Reciprocating Machinery and Propulsion System and Shafting) Types III, IV, and V
MIL-STD-202G	Test Method 201A: Vibration
MIL-STD-202G	Test Method 204D: Vibration, High Frequency
MIL-STD-202G	Test Method 214A: Random Vibration
MIL-STD-810F	Test Method Standard For Environmental Engineering
NEMA MG1	Assists users in the proper selection and application of motors and generators.
PD 6585-2	Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace
SN 640312a	Effects of vibrations on buildings
UIC 513	Guidelines for evaluating passenger comfort in relation to vibration in railway vehicles
UNI 9916	Criteria for the measurements of vibrations and the assessment of their effects on buildings
UNI 9942	Methods for measurement of vibrations generated internally of railways tunnels
VDI 2038-1 VDI 2038-2 VDI 2038-3	Serviceability of structures under dynamic loads – Methods of analysis and evaluation in structural dynamics Part 1: Basics, methods, procedures and loads Part 2: Shock and vibration – prognosis, measurement, evaluation and reduction measures Part 3: Secondary airborne sound – prognosis, measurement, evaluation and reduction measures
VDI 2057-1 VDI 2057-2 VDI 2057-3	Human exposure to mechanical vibrations Part 1: Whole-body vibration Part 2: Hand-arm vibration Part 3: Whole-body vibration at workplaces in buildings
VDI 2062-1 VDI 2062-2	Vibration insulation Part 1: Terms and methods Part 2: Insulation elements
VDI 2064	Active vibration isolation
VDI 2149	Transmission dynamics – Elastic mechanisms
VDI 3831	Protective measures against vibration effects on man
VDI 3832	Measurement of structure-borne sound of rolling element bearings in machines and plants for evaluation of condition
VDI 3833-1 VDI 3833-2	Dynamic damper and dynamic vibration absorber Part 1: Dynamic damper – Fundamentals, characteristics, implementation, application Part 2: Dynamic vibration absorber and dynamic vibration absorption
VDI 3834-1 VDI 3834-2	Measurement and evaluation of the mechanical vibration of wind turbines and their components Part 1: Wind turbines with gearbox Part 2: Wind turbines without gearbox
VDI 3836	Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers
VDI 3837	Ground-borne vibration in the vicinity of at-grade rail systems – Spectral prediction method
VDI 3838	Measurement and evaluation of mechanical vibration of reciprocating piston engines and piston compressors with power ratings above 100 kW
VDI 3839-1 VDI 3839-2 VDI 3839-4 VDI 3839-5 VDI 3839-6 VDI 3839-7 VDI 3839-8	Instructions on measuring and interpreting the vibrations of machines Part 1: General principles Part 2: Vibration patterns for excitation arising from unbalance, incorrect assembly, bearing faults and damage to rotating components Part 4: Typical vibration patterns with fans and blowers for gases Part 5: Typical vibration patterns with electrical machines Part 6: Typical vibration patterns with machine sets in hydraulic power stations Part 7: Typical vibration patterns with centrifugal pumps Part 8: Typical vibration patterns with reciprocating machines
VDI 3840	Vibration analysis for machine sets
VDI 3842	Vibrations in piping systems

• 셀 병합
• 행 분할
• 열 분할
• 너비 맞춤
• 삭제

 

포스팅해 드리는 내용에 대해 문의 사항 있으시면 언제든지 연락부탁 드립니다.

항상 최선을 다하겠습니다.

감사합니다.

전화 : 031-680-1225

메일 : wgjeon@cndtec.co.kr